OHM
（
ChongQing
）
Electronic Technology CO.,LTD.
Tel: 023-68151154 Fax: 023-68151154-803 Service:400-920-9120
Ver.: 2016.01.1.0.3 Operating Manual for TCS-C Page 8 of 28
2.1.2 Special function
Impact shutdown function
¾
When the transmitter is impacted externally, the transmitter will automatically shut down.
Weightlessness shutdown function
¾
When it detected that the transmitter is in gravity-free condition, the transmitter will
automatically shut down. For example, when the transmitter accidentally falls off or one
operator tosses the transmitter to another operator, this can prevent mis-operation caused by
falling of the transmitter.
Tilt shutdown function
¾
When the transmitter reaches a certain tilt angel or faces down, the transmitter will
automatically shut down.
Manual frequency switching function
¾
Under radio operation, long press “Start” key for 5s; then the transmitter buzzer rings and
frequency change to another channel.
Standby transmitter
¾
It has the same functions as the original transmitter and does not have the Smart Card.
When the original transmitter fails, remove its Smart Card and insert it into the standby
transmitter; then the standby transmitter can replace the original one and immediately work
One-to-many function (as shown in the figure)
¾
One transmitter can control several receivers.
¾
Through selection function on the transmitter, select one receiver for control or several
receivers for synchronous control.
