PP-1 PATCH PANEL
5
FRONT PANEL
9 & 12 Inputs 1 & 2 on female XLR
Electronically balanced input sockets accept
XLR male connectors. Parallel wired to inputs
A/B on rear.
Wired as follows:
Pin 1 = Ground,
Pin 2 = Hot,
Pin 3 = Cold.
13 Output 4 way Neutrik Speakon
Connectors
©
©
Accepts 4 way Neutrik
Speakon plug
connector NL4FC. Wired internally to the rear
Binding Posts.
1 Backlit Logo (Blue)
Indicates that the Patch Panel is switched on.
Powered by maintenance free LED’s.
2 Ethernet Connector (RJ45)
Use a standard network cable to connect up to
four amplifiers to a single network.
Important: Use either the RJ45 on the front or
rear of Patch Panel. Do not connect to both as
they are wired together.
3 Outputs 8 way Neutrik Speakon
Connectors
©
©
Accepts 8 way Neutrik Speakon plug
connector NL8FC. Wired internally to the rear
Binding Posts.
3
6
5
1
2
7
4
OPERATING INSTRUCTIONS
8
11
14 Sequencer On/Off Button
This button enables the amps to be turned on
in sequence. After an interruption in mains
supply the sequencer will automatically
restart.
USB LIGHT
ASSIGNABLE
INTERNAL
MATRIX
2
INPUT 2
LINK 2
LINK 1
INPUT 1
1
3
4
SPEAKER 2
RJ45
SEQUENCER
MAINS
230V~
50Hz
32A
LIVE
EARTH
POWER 4
POWER 1
POWER 2
POWER 3
NEUTRAL
PUSH
PUSH
PUSH
SPEAKER 1
12
15
13
14
SPEAKER 1
4 USB Sockets
2 x USB sockets to take USB peripherals such
as LED Gooseneck Lights 1 x provided.
5 Earth Indicator LED (Green)
Indicates that the Earth has been correctly
wired. Will not light if wiring is incorrect.
6 Live Indicator LED (Red)
Indicates that the Live has been correctly
wired. Will not light if wiring is incorrect.
7 Neutral Indicator LED (Blue)
Indicates that the Neutral has been correctly
wired. Will not light if wiring is incorrect.
8 Mains Input Single Phase C32 Socket.
Accepts female C32 Plug (Provided). Ensure
correct wire thickness and configuration is
used.
9
10
10 & 11 Input Links 1 & 2 on male XLR
Electronically balanced input link sockets
accept XLR female connectors. Parallel wired to
inputs links A/B on rear.
Wired as follows:
Pin 1 = Ground,
Pin 2 = Hot,
Pin 3 = Cold.
15 Sequencer Indicator LED’s (Red)
Lights up as to indicate the amplifiers have
powered up.
