OHM BootiQue Active System, User Manual

Page: 7 / 10

BootiQue Active System
7
WALL PANEL
REMOTE CONTROL OPERATION
1 USB Input Socket
USB socket to take USB peripherals such as
mp3 players and Flash Drives with MP3 tracks
on. When used with a fl ash drive the remote
control is used to control track selection and
navigation.
5 Push Button On/Off Switch
Switches the BootiQue System on and off.
3 Phono Input
Use standard RCA plugs wired as follows:
Sleeve = Ground, Tip = Live
4 Phono Link
Use standard RCA plugs wired as follows:
Sleeve = Ground, Tip = Live
2 Remote Control Sensor
Allows remote control to work the BootiQue’s
controls via the wall panel.
Forward
MP3 vol down
MP3 vol up
EQ
Loop one
Loop all
MP3 Controls this will only control a fl ash drive or device
plugged into the USB Input with MP3 tracks on.
Goes forward one track.
Lowers the volume of the MP3 device
plugged in via the USB input.
Raises the volume of the MP3 device
plugged in via the USB input.
Scrolls through the seven pre set
system EQ’s.
Continuously plays one track.
Continuously plays all tracks.
Power on/off Puts the Unit in and out of standby.
Mute Turns the volume off and on.
MUTE
Line in Switches unit to any device plugged in
via the Phono inputs.
LINE
iPod in Switches unit to any iPod or mp3 device
plugged in via the iPod input.
iPod
Vol down Lowers the volume of the BootiQue
system.
VOL
Bass vol down Lowers the volume of the BootiQue
subwoofer.
BASS
Bass vol up Raises the volume of the BootiQue
subwoofer.
BASS
Vol up Raises the volume of the BootiQue
system.
Play/Pause Switches between play and pause on
the MP3 memory stick.
Back Goes back one track.
Stop Stops the MP3 playback.
MP3 in Switches unit to any device plugged in
via the USB Input.
MP3
MP3
EQ
LOOP
ONE
LOOP
ALL
VOL
MP3