6/ 36
Step1: Connect power supply (DC 12V)
Step2: Connect LAN port with router/network switch/ hub via RJ45 cable.
2.2.2 Connect LAN port with PC via RJ45 cable.
The Light of LAN port turns green within 5 seconds under the normal network situation after power
on.
3 Searching device and installing ActiveX
3.1 Searching device and modify network parameters
Run
“SearchNVS” to find the default IP and modify mega pixel ip camera network parameters
according to clients
’ local PC IP gateway (Such as IP address, subnet mask, gateway and so on)
How to run “SearchNVS”,
A: Find the NVSCenter software in
【
Application
】
file from the CD.
B: Install the NVSCenter software, then do it as follows to find SearchNVS:
【
Start
】
---
【
all
programs
】
---
【
NVS Center
】
---
【
Search NVS
】
.
Note
：
1. The factory settings of the IP Camera as follows IP: 192.168.55.160; Subnet mask:
255.255.255.0.
2. User name: admin; Password: admin
3. Run the SearchNVS software to search and modify IP Camera network parameters .It is
multicast protocol. But the firewall forbids the multicast data packet. So please close the firewall
first.
(1)Click
【
SearchNVS
】
button to run SearchNVS software as follow:
【
Local IP
】
Display the local PC IP. If your PC is NIC or multi-addressed local IP, please select one
IP address to connect NVS.
