23/ 36
You can set three users for one IP Camera. One user is Administrator and others are Guest.
Administrator can set parameters for the IP Camera. However, Guest cannot set parameters.
Note:
User name can be composed of letters, numbers, underline or dot between 1 and 16
characters. Pay attention to the capitals and small letters
.
4.11 Terminal
Terminal set:
Pan/Tilt Decoder connect with RS485 port. When there is control device to connect with IP Camera,
RS485 parameters need to be set according to the settings of the control device (Address, Protocol,
Bit rate), and download the corresponding protocol.
click the
【
save
】
button after setting
.
4.12 Storage set
4.12.1 There is Device Config, Record set and Snap set in Storage set.
The device set as follows:
Default Administrator Name: admin password: admin
Default Guest Name: user1 \user 2 password: user1 \user 2
Note: Pay attention to match capitals and small letters to User name and password
