10
RXF34 M.2 FRONT FORK 100 H SERVICE
Note!
1
Clean all parts using disc brake cleaner and a rag to remove dirt, old grease and
thread sealant before reassembling. Lubricate new o-rings/x-rings etc. with fresh
assembly grease if no other grease is specified.
13.
Clean the inside of the stanchion tube using disc brake cleaner
and a soft rag. Use a rod to push the rag thru the stanchion. Be
careful not to scratch the surface of the stanchions.
14.
Apply a small amount of function grease all around the new
x-ring (01027-25) and the new back-up rings (19525-01).
15.
Install the new x-ring (01027-25) on the piston.
16.
Install the new back-up rings (19525-01) on the piston.
17.
Install the new o-ring (00638-85) on the seal head.
18.
Install the new o-ring (00338-57) on the rod end.
13
18
17
16
15
14
