NOTE!
During storage and transportation, especially
at high ambient temperature, the oil and grease
used for assembling may run out inside the
packing and damage the expanded polysty-
rene packing material. This is not unusual and
is in no way detrimental to the shock absorber.
Kit contents
Before installing the shock absorber please
make sure that all parts for mounting are at
hand. Contact Prodrive if something is miss-
ing.
Description
Part No
Pcs
Sleeve 12/14/25 (rear)
00123-15
1
Tie-rap
00231-01
4
Hose clamp
00643-02
2
C-spanner
01796-01
1
(in left rear shock)
Flange nut
00139-04
1
Flangle bolt
00432-03
1
Reservoir mount
00230-04
2
Chamber bushing offset
05194-10
2
Chamber bushing offset
05194-20
2
Owners manual
1
Safety signs
Important information concerning safety
is distinguished by the following notations:
The Safety alert symbol means:
Caution. Your safety is involved.
WARNING!
Failure to follow warning instructions could
result in
severe or fatal injury
to anyone
working with, inspecting or using the sus-
pension, or to bystanders.
CAUTION!
Caution indicates that special precautions
must be taken to avoid damage to the sus-
pension.
NOTE!
This indicates information that is of im-
portance with regard to procedures
Before installation
Öhlins Racing AB, as manufacturer of the
components, and the Öhlins dealer, as an
assembler of the shock absorber can not
be held responsible for any damage what-
soever to shock absorber or vehicle, or in-
jury to persons, if the instructions for set-
tings and maintenance are not followed ex-
actly. Similarly the warranty will become null
and void if the instructions are not adhered
to.
WARNING!
1. Installing a shock absorber that is not
approved by the vehicle manufacturer may
affect the stability of your vehicle. Öhlins
Racing AB or Prodrive cannot be held re-
sponsible for any personal injury or damage
whatsoever that may occur after fitting the
shock absorber. Contact Prodrive or other
qualified person for advice.
2. Please study and make certain that you
fully understand the owner’s manual be-
fore handling this shock absorber. If you
have any questions regarding proper in-
stallation procedures, contact Prodrive or
other qualified person.
3. The vehicle service manual must be re-
ferred to when installing the Öhlins shock
absorber.
NOTE!
Öhlins products are subject to continual
improvement and development. Consequently,
although these instructions include the most
up-to-date information available at the time of
printing, there may be minor differences
between your suspension and this manual.
Please consult Prodrive if you have any ques-
tions with regard to the contents of the manual.
Notes
