Mounting Instructions
Öhlins shock absorber kit HO 519 for Honda Hornet 600
© Öhlins Racing AB. All rights reserved. Any reprinting or unauthorized use without the
written permission of Öhlins Racing AB is prohibited. Printed in Sweden.
Öhlins shock absorber 46 HRCS
Your Öhlins shock absorber type 46 HRCS
features the following adjusters:
Compression damping adjuster
Adjustments are made on top of the reservoir.
Rebound damping adjuster
Adjuster wheel on the piston shaft above the end
bracket.
Spring pre-load adjuster
Adjustments are made by turning the rings with
the c-spanner. Clockwise for harder adjustment,
counter clockwise too release the pre-load.
NOTE!
When delivered the Öhlins shock absorber is
dialed to recommended settings for the specific
brand and make of the vehicle. If you have
changed the settings, check like this:
The adjusters have a normal right hand thread. Turn
the damping adjusters clockwise to fully closed (pos.
zero [0]). Turn counter clockwise to open and count
the clicks until you reach the recommended number
of clicks. See Setup data at last page.
CAUTION!
Do not use too much force, delicate sealing sur-
faces can be damaged.
Rebound
damping
adjuster
Compression
damping
aduster.
Spring
pre-load
adjuster
Öhlins Racing AB, Box 722, S-194 27 Upplands Väsby, Sweden.
Phone +46 8 590 025 00. Fax +46 8 590 025 80.
www.ohlins.com
Part No. HO 519. Issued 05 06 08
Checking sag and ride height
Front suspension
F1. Bike on a stand with the
suspension fully extended
= ............
F2. Bike on the ground without rider = ............
F3. Bike on the ground with rider
= ............
Free sag
F1 - F2 = ............
Ride height
F1 - F3 = ............
Rear suspension
R1.Bike on a stand with the
suspension fully extended
= ............
R2.Bike on the ground without rider = ........... .
R3.Bike on the ground with rider
= ............
Free sag
R1 - R2 = ............
Ride height
R1 - R3 = ............
Bike on a stand.
F1
R1
Bike on the ground.
F2
R2
Bike with rider on.
F3
R3
Setup data
Shock absorber length
304 mm
Shock absorber stroke
54 mm
Spring pre-load
12 mm
Rebound damping adjuster
16 clicks
Compression damping adjuster
10 clicks
