3
MOUNTING INSTRUCTIONS
Remove the original fork legs
Warning!
⚠
We strongly recommend to let an Öhlins dealer
install this product.
Warning!
⚠
If you work with a lifted vehicle, make sure that it
is safely supported to prevent it from tipping over.
Note!
1
When you work with this product, see the
vehicle service manual for vehicle specific
procedures and important data.
Note!
1
Before you install this product clean the vehicle.
1
Place the motorcycle on a work stand so that
the front wheel barely touches the ground.
2
Remove the front wheel, plastic fork leg
protectors and the brake caliper.
3
Measure the distance from the top of the upper
triple clamp to the center of the front wheel
axle, see figure.
Note measure
Fork height position
4
Loosen the upper triple clamp screws.
5
Loosen the top cap ½ turn.
6
Loosen the lower triple clamp screws.
7
Remove the fork legs from the vehicle.
8
Clean the fork legs, make sure to clean
underneath the fork bottom.
9
Refer to the vehicle service manual to remove
the original front fork and spring from the fork
leg. Turn the fork legs upside down and pour
out all oil.
2
3
5
4
6
Upper triple
clamp
Lower triple
clamp
4
