3
Mou tI g I StRuctIo S
10
10
Use the supplied M8x50 screw to install the
preload adjuster on the right side silencer
bracket, see figure. Tighten the screw. You may
need to hold the screw not to untighten it when
you tighten the M8 nut.
11
Install the:
- foot rests
- break fluid reservoir
- position sensor (if removed)
Tighten the rear sub frame screws.
12
Install the seats.
13
Make sure that all screws are tightened to the
correct torque according to the vehicle service
manual.
cautione!
✋
Make sure that you tighten all screws to the
correct torque and that nothing fouls or restricts
movement of the shock absorber/front fork/
steering damper when the suspension is fully
compressed or extended.
