9
Inspection and maintenance
Clean the shock absorbers externally with a soft
detergent . Use compressed air . Be careful that
all dirt and debris is removed.
Lift the bump rubber and clean the area below
(Fig.16).
Keep the shock absorbers clean and always
spray them with oil (QS 14, WD40 or CRC 5-56
or similar) after washing the vehicle.
CAUTION!
Never use detergents that can damage the sur-
faces of the shock absorber. Use of thinner and
brake cleaner will dry the surfaces too much..
Inspection points: (Fig.17)
1.
Check ball joints for possible excessive play.
2.
Check the piston shaft for leakage and damage.
3.
Check the shock absorber body and for
external damages.
4.
Check the external reservoir for damages that
can restrict the floating piston from moving freely.
5.
Excessive wear of rubber components
6.
Fastening to the vehicle
Preventive maintenance and regular inspection
reduces the risk of functional disturbance. If there
is any need for additional service, please get in
touch with an authorised Öhlins service workshop.
There they have the necessary tools and know-
how for whatever you need.
Recommended inspection and
maintenance intervals:
Normal use
2 - 3 times a year
Race track
Every ten hours
Once a year, general:
Change shock absorber oil.
Use Öhlins shock absorber oil only.
1
1
3
4
3
2
5
5
6
16. Lift the bump rubber
and clean the area below.
17. Inspection points:
NOTE!
Make certain that your shock absorber are always
filled with Öhlins High performance shock ab-
sorber oil
Summary of Contents for 07235-01A5L.p65
Page 1: ...V...
