3-13
3.8 Setting of calculating channels
[Description]
By assigning the data acquired from slave devices to the calculating channels "CH13" to "CH48" on
the master side, trend display and recording of the data can be carried out on this device.
* The setting of calculating channels can be done only from the parameter loader.
* For details about other setting items concerning the calculating channels, see the PARAMETER
LOADER INSTRUCTION MANUAL (WXPVM70mnA0102E).
[Operation]
Select [Calculating formula] in the [Calc. CH] tab to open the calculating formula input form.
(1)
Modbus (ID1 to 12: 01 to 16)
The communication ID set in section 3.6 is the ID for ModbusCH. For the numbers in the latter
part, input the number you want to refer to from the data acquired with the ID. To acquire the 3rd
data from the data acquired with the data count 8, set 3.
(1) Modbus
