OHAUS Voyager V00640, Instruction Manual

Page: 19 / 329

13
>O/T<
>O/T<
1620.00
WEIGHT
0%
100%
CONTRAST
GRAMS
STABLE
MOVE HIGHLIGHT
CONTRAST
MAIN MENU
Enter
Go Back
Heip
Print
OHA
US
®
>O/T<
>O/T<
200.00
WEIGHT
0%
100%
CONTRAST
GRAMS
STABLE
MOVE HIGHLIGHT
CONTRAST
MAIN MENU
Enter
Go Back
Heip
Print
OHA
US
®
Go Back
Help
Print Enter
3.5 Basic Weighing
Voyager balances are shipped with grams enabled. When the balance is to be used with other Type Approved/Legal
for Trade units of measure, the desired unit must be enabled. For weigh below applications, refer to section on
density measurements.
(
Example Material 1620g)
(
Example Container 200g)
MAIN MENU
CHANGE UNITS SET BALANCE
LIBRARY CALIBRATION
CUSTOM MENU
CHANGE MODE
Procedure
• Press arrow button to select MAIN MENU.
• Press
Enter
button.
• Using the arrow buttons, select CHANGE MODE.
• Press
Enter
button.
• Press or arrow button and select BASIC
WEIGHING.
Zero/Tare
When weighing material or objects that must be held in a
container, taring stores the container weight in the
balance’s memory, separate from the weight of the
material in the container.
• Press O/T with no load on the pan to set the
balance to zero.
• Place an empty container on the pan. Its weight is
displayed. (200 gram container is shown).
• Press O/T the display blanks until stable weight
readings are received, then indicates zero. The
container’s weight is stored in memory.
• Add material to the container. As material is added,
its net weight is displayed. (Example is 1620 grams).
• Removing the container and material from the plat-
form will cause the balance to display the container’s
weight as a negative number. The tared weight will
remain in memory until
O/T is pressed again or
the balance is turned off.
• Pressing O/T resets the balance to zero.
0.00
WEIGHT
0%
100%
GRAMS STABLE
MOVE HIGHLIGHT MAIN MENU CONTRAST
MAIN MENU
CHANGE UNITS SET BALANCE
LIBRARY
CALIBRATION
CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILLING
ANIMAL WEIGHING
CHECK WEIGHING
DIFF WEIGHING
FORMULATION
QUICK CHECK
STATISTICS
DENSITY