OHAUS VE1500P, User Manual

Page: 5 / 36

VE Series Base EN-3
Loading/Unloading the Pallet Scale
Place the load on the scale with a hand pallet truck, crane or forklift. Ensure that the load is not swinging when it is placed on
the U-Pallet scale.
Remove the load by raising it at least 10 cm above the U-Pallet scale before moving or repositioning.
4. MAINTENANCE
4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
4.2 Troubleshooting
For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.
5. TECHNICAL DATA
Specifications:
Models VE1500P VE1500PW
Platform Capacity 1500 kg
Emin 0.5 kg
Operating Temperature / Humidity -10 °C to 40 °C / 0% to 95% Relative Humidity, Non-Condensing
Load Cell Capacity Emax 1000 kg
Load Cell Safe Overload Limit 120% of Emax
Load Cell Output Impedance
350 Ω ± 3.5 Ω
Load Cell Excitation Voltage 5V ~15V, DC/AC
Junction Box Rear panel access, IP65, Stainless Steel, 5 m Cable
6. COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark Standard
This product complies with the EU Directives 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU
(NAWI). The EU Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the EU Directive 2002/96/EC (WEEE). Please dispose of this product in
accordance with local regulations at the collecting point specified for electrical and electronic equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.