EN-28
Valor 5000 Series Scales
5.3 Compliance
Compliance to the following standards is indicated by the corresponding mark on the product
.
Marking Standard
This product conforms to the EMC directive 2004/108/EC, the Low Voltage Directive
2006/95/EC and the Non-automatic Weighing Instruments Directive 2009/23/EC.
The complete Declaration of Conformity is available online at www.ohaus.com.
AS/NZS4251.1 Emission, AS/NZS4252.1
NSF Criteria C-2-1963
NSF/ANSI /3-A 14159-1 – 2002
Important notice for verified weighing instruments
Weighing Instruments verified at the place of manufacture bear one of the preceding
mark on the packing label and the green ‘M’ (metrology) sticker on the descriptive
plate. They may be put into service immediately.
Weighing Instruments to be verified in two stages have no green ‘M’ (metrology) on
the descriptive plate and bear one of the preceding identification mark on the
packing label. The second stage of the initial verification must be carried out by the
approved service organization of the authorized representative within the EC or by
the national weight & measures (W+M) authorities.
The first stage of the initial verification has been carried out at the manufacturers work. It comprises all
tests according to the adopted European standard EN 45501:1992, paragraph 8.2.2.
If national regulations limit the validity period of the verification, the user of the weighing instrument must
strictly observe the re-verification period and inform the respective W+M authorities.
