6
2.4
Connect the pH electrodes
There are 3 sockets for electrode.
“pH” socket (BNC); “TEMP.” Socket (Cinch) and “REF” Socket
(2mm banana).
For ST310 electrode, should connect the BNC and Cinch socket. For 2-in-1 pH electrode (ST210)
only need to connect the BNC.
REF socket is for separate reference electrode. (e.g.STREF01)
2.5
Meter stand for adjusting view angle
One unique design of the
STARTER 3100
is the meter stand, which can be used to adjust the view
angle of the display in case of working on high table.
2.6
Attached quick guide
Another unique design of the
STARTER 3100
is the attached quick guide, the quick guide is
attached into the bottom housing of the meter, you can use finger to pull it out.
