EN-2 STARTER 300C Portable Conductivity Meter
1.2
Safety Precautions
CAUTION: Read all safety warnings before installing, making connections, or servicing this
equipment. Failure to comply with these warnings could result in personal injury and/or property
damage. Retain all instructions for future reference.
x
Use the equipment only in dry locations.
x
Dry off any liquid spills immediately. The instrument is not watertight.
x
When using chemicals and solvents, comply with the instructions of the chemical producer
and the general lab safety rules.
x
Use only approved accessories and peripherals.
x
Operate the equipment only under ambient conditions specified in these instructions.
x
Do not operate the equipment in hazardous or unstable environments.
x
Service should only be performed by authorized personnel.
1.3
Display and controls
Displays
1
Endpoint stability icon
; Auto endpoint icon
2
Measurement icon - ; measurement or calibration is running
3
Calibration icon -
; calibration in progress
4
Setup icon -
; instrument is in the setup mode
5
Battery status icon shows the condition of the batteries - fully charged, half-charged or fully
discharged
6
TDS factor in the setup mode
7
Conductivity / TDS / Cell Constant
8
Standard
/ Memory number
/ Error index
9
Temperature during measurement or reference temperature in setup mode
1
2
3
4
5
6
8
9
7
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
