EN-68 SF-110B
This parameter is used to filter specific content in the data transmitted by the scale. For
example, suppose the scale outputs the following data:
+ 100.00 kg S
This data does not comply with the No.1 rule above, which will cause the printer not to
recognize this data as weighing data, and it will not work in modes other than the Direct
mode. In order for the printer to recognize it as weighing data, it is necessary to filter this
string, at this time, you can set this parameter to “S”, as below:
[OK]
-> ▲or ▼
If you want to filter multiple strings in the data, you can enter it with a comma separator.
For example, the following setting will filter "S" and "Net" in the data.
[OK]
-> ▲or ▼
