SF-110B EN -21
4.1
Direct Mode
Use this application to print the data from scale directly.
In the standby interface, press the
[MODE]
key, select
DIRECT
and press PRINT key on
the scale.
This mode is usually used in the following scenarios:
Print in the format defined by the scale.
Print the calibration report output by the scale. This is because the calibration
report needs to be output as is, but in other modes, the printer will automatically
add other information or filter out the data except the weighing data.
When a problem occurs in other modes, switch to the Direct mode temporarily
and observe the original data to facilitate analysis and solve the problem.
4.1.1
Mode Setup
In the Direct mode, the header and trailer can be added manually or automatically.
The automatic header and trailer functions are usually used in the following scenarios:
The information output by the scale lacks the necessary content, such as
manufacturer information, model, S/N, signature, etc.
Add sample name / lot number and other information to the report.
Add controlled time / date and other information to the report output by the scale.
