
A-4
APPENDIX A SERVICE TOOL INSTRUCTIONS
2.
If the communications parameters have to be set, click on the
Com Port
tab and the screen
shown in Figure A-5 will appear. Adjust the parameters as required to match the balance.
Figure A-5.
A.5 USING CONFIGTOOL.EXE. (CONT.)
3.
When the communications parameters are matched click on the
Test Command
tab and
test the communications.
4.
In this example, see figure A-6, the P command resulted in the
0.02g
being written in the
lower screen. The V command resulted in
Sr: 1.10
being written. The
T
command had
the effect of zeroing the balance, and the last
P
command resulted in the
0.00g
being
written. If the balance does not reliably communicate the problem must be fixed before
continuing.
Figure A-6.
www.mirvesov.ru
Тел
.: (495) 921-44-57
All manuals and user guides at all-guides.com