OHAUS ranger 7000, Instruction Manual

Page: 3 / 44

RS232 Interface EN-1
INTRODUCTION
This RS232 interface Kit is for use with the Ohaus Ranger
®
7000.
KIT CONTENTS

Pressure Button

RS232 PC Board

Screws (4)
Note: RS232 cable is not included. If RS232 cable is needed from OHAUS, please
order 80500552.
INTERFACE INSTALLATION
Only one interface module can be installed in the terminal option slot at a given time.
Install the Interface module on the underside of the terminal as shown below.
Note: The appearance of your model may be different from the one shown.
1 . Release the two screws, remove the red interface options cover, and unplug the black rubber
insert.
Options slot