OHAUS RANGER 4000 Series, Instruction Manual

Page: 20 / 41

Ranger
™ 4000 Series EN 18
Set the status.
OFF = disabled
ON = enabled
Count [
COUNt
]
Set the status.
OFF = disabled
ON = enabled
Check [
CHECk
]
Set the sub-mode
OFF = disabled
WEIGH = weight mode
PERCNT = percent mode
COUTN = count mode
Dynamic [
DYNAmM
]
Set the status.
OFF = disabled
MAN = averaging and resetting are initiated manually
SEMI = averaging is automatically initiated
resetting is manually initiated
AUTO = averaging and resetting are automatically initiated
End Mode [ End ]
Advance to the next menu or return to the top of the current menu.
4.6 Unit Menu
This menu activates units so they will be accessible with the Units button. The units in the menu
m
ust be turned “on” to be active.
Note: Available units vary by model and local regulations.
4.7 Print1 Menu
Enter this menu to set printing parameters. Default settings are bold .
Note: The Print2 menu is only displayed if a second interface is installed.
Reset: no , yes
Stable Only: off , on
Auto Print: off
on stable
interval
continuous
accept
Content: Result (-> off, on )
Gross (-> off , on)
Net (-> off , on)
Tare (-> off , on)
Header (-> off , on)
Footer (-> off , on)
Mode (-> off , on)
Unit (-> off, on )
Info (-> off , on)
Accu (-> off , result, all)
Layout: Format (-> S ,M)
Feed (-> Line , 4 Lines, form)
Data Transfer: off , on