CHAPTER 1 GETTING STARTED
Ohaus Corporation www.ohaus.com
1-6
Ranger
™
(Count) 3000 Series Service Manual
1.6 SCALE OPERATION
–
RANGER 3000
This section contains information on the basic operation of the Ranger 3000 scale.
1.6.1 OVERVIEW OF THE CONTROLS
Figure 1-2. Ranger 3000 Front Display with controls.
TABLE 1-5.
Button
Functions
On/Zero
Off
Yes
Short Press (when on): Sets display to zero
(when off): Turns scale on
Long Press (when on): Turns the scale off
Short Press (in Menu): Selects/accepts displayed setting
Print
Units
No
Short Press: Sends current display value to serial port
(auto print OFF).
Long Press: Toggles through active weighing units
Short Press (in Menu): Toggles through available settings
Function
Mode
Back
Short Press: Selects function setting
Long Press: Selects active Mode
Short Press (in Menu): returns to previous settings
M+
Menu
Exit
Short Press: Accumulates the weight or displays the
accumulated information at 0 load.
Long Press: Enters User Menu
Short Press (in Menu): Quickly exit User Menu
Tare
Short Press: Enter/clear a tare value. Clears the accumulation
when the accumulation information is displayed.
1.6.2 Power ON/OFF
To turn the scale on, press and hold the
On/Zero Off
button for 2 seconds. The scale
performs a display test, momentarily displays the software version, and then enters the
active weighing mode.
To turn the scale off, press and hold the
On/Zero Off
button until OFF is displayed.