Ranger 4000 Count Series EN 29
Command Function
)
MT-SICS Commands
Command
Function
LEVEL 0 @
Reset the scale
I0
Inquiry of all available SICS commands
I1
Inquiry of SICS level and SICS versions
I2
Inquiry of scale data
I3
Inquiry of scale software version
I4
Inquiry of serial number
S
Send stable weight value
SI
Send weight value immediately
SIR
Send weight value repeatedly
Z
Zero the scale
ZI
Zero immediately
LEVEL 1 D
Write text into display
DW
Weight display
SR
Send and repeat stable weight value
T
Tare
TA
Tare value
TAC
Clear tare
TI
Tare immediately
7.3.2 Connections for RS232
The 9-
The pin connections are as follows:
Active pins: PIN 2 = TXD, PIN 3 = RXD, PIN 5 = Ground
Figure 7-2. RS232 Pins
7.4 Printouts
The following sample print outs are generated by the
print command. The content of the printout is defined in the Print Content menu item. A
maximum of 24 characters can be printed on each line.
Description
Comment
Part Number line
If Printx Content P/N is ON
Result line
If Printx Content Result is ON
Gross value line
If Printx Content Gross is ON and a tare value is entered
Net value line
If Printx Content Net is ON and a tare value is entered
Tare value line
If Printx Content Tare is ON and a tare value is entered
Information line
If Printx Content Info is ON
Accumulation line
If Printx
Content
Accu is All
Accumulation line
If Printx Content Accu is All
www.
GlobalTestSupply
.com
Find Quality Products Online at:
