EN-20
PX Series Balance
4. See Section 4.5.1 and Section 4.5.2 for the specific
procedures for density determination.
5. Press the
Function / Mode
button to display the density of
the sample.
6. After completion of the test, press the
Function / Mode
button to test a new sample.
4.5.4 Measuring the Density of a Liquid Using a Calibrated Sinker
Press and hold the
Function / Mode
button until
Density
appears. Press
Yes
to enter the
Density Determination
.
Item Settings:
Sample Type: Liquid
Volume: The calibrated sinker has a default volume of 10.0 ml,
which can be increased or decreased by pressing
No
or
Back
.
After setting the volume, press
Yes
to begin the weighing.
Note:
when the Density Type is set to Liquid, the Liquid type
and Porous material selections are disabled.
