OHAUS CS 2000 Instruction Manual Download Page 17

 
 

 

EN-15

Valor 2000 Series Scales

 

 

Disposal 

In conformance with the European Directive 2002/96 EC on Waste Electrical 
and Electronic Equipment (WEEE) this device may not be disposed of in 
domestic waste. This also applies to countries outside the EU, per their 
specific requirements. 

Please dispose of this product in accordance with local regulations at the 
collecting point specified for electrical and electronic equipment. 

If you have any questions, please contact the responsible authority or the 
distributor from which you purchased this device. 

Should this device be passed on to other parties (for private or professional 
use), the content of this regulation must also be related. 

Thank you for your contribution to environmental protection.

 

 

FCC Note 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection 
against harmful interference in a residential installation.  This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications.  However, there is no guarantee that 
interference will not occur in a particular installation.  If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following 
measures: 
•   Reorient or relocate the receiving antenna. 
•   Increase the separation between the equipment and receiver. 
•   Connect the equipment into an outlet on a circuit different from that to which the receiver 
     is connected. 
•   Consult the dealer or an experienced radio/TV technician for help. 
 
This Class B digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 
 

ISO 9001 Registration 

In 1994, Ohaus Corporation, USA, was awarded a certificate of registration to ISO 9001 by Bureau 
Veritus Quality International (BVQI), confirming that the Ohaus quality management system is 
compliant with the ISO 9001 standard’s requirements.  On May 15, 2003, Ohaus Corporation, 
USA, was re-registered to the ISO 9001:2000 standard. 

Summary of Contents for CS 2000



















Reviews: