OHAUS CD-1, Instruction Manual

Page: 5 / 48

1
CD-1 Indicator
1. GETTING TO KNOW YOUR CD-1 INDICATOR
1.1 Introduction
Thank you for deciding to purchase a CD-1 Indicator from Ohaus. The Ohaus CD-1 Indicator is a rugged, reliable,
electronic weight indicator designed for easy operation. The CD-1 Indicator can drive one analog load cell and provide
capacity selections up to 1,000kg.
The CD-1 Indicator operates from six Alkaline “AA” batteries and can also be powered externally using the supplied AC
adapter. A 0.9 inch / 2.3 centimeters high LCD provides easy visibility when working at distances from the indicator.
Two membrane switches are mounted on the front panel that enable simple set up procedures. A metal bracket with
hardware is included that permits mounting the indicator to a wall or table.
Behind your instrument stands OHAUS, a leading manufacturer of precision Indicators, Scales and Balances. An
Aftermarket Department with trained instrument technicians is dedicated to providing you with the fastest service pos-
sible in the event your instrument requires servicing. OHAUS also has a Customer Service Department to answer any
inquiries regarding applications and accessories.
To ensure you make full use of the possibilities offered by your CD-1 Indicator, please read the manual completely
before installation and operation.
1.1.1 Features
Major features include:
• 1:10,000 maximum displayed resolution
• Durable ABS plastic housing in a compact industrial design
• Simple 2 function raised membrane buttons with Tare
• 5-digit, 7-segment, 0.9 inch / 2.3 centimeter high LCD display
• Kilogram weight unit
• AC or battery power
• Load Cell Connector
• Wall mount hardware
• Battery saving Auto Shut-off after five minutes of inactivity (when operated on batteries)
2. INSTALLATION
2.1 Unpacking and Checking
Open the package and remove the instrument and the accessories. Check the instrument for transport damage. Imme-
diately inform your Ohaus dealer if you have complaints or if parts are missing. Your CD-1 Indicator package should
contain:
• CD-1 Indicator • Instruction Manual • Mounting Bracket
• Mounting Screws (2) • AC power adapter • Warranty card
• Screw anchors (2) • Load Cell Connector
Store all parts of the packaging. This packaging ensures the best possible protection for the transport of your instrument.