OHAUS AV114, Instruction Manual

Page: 27 / 60

Adventurer Pro EN-23
3.5.7 Totalize
Totalize measures the cumulative weight of items. Refer to Section 3.4.3 to enable totalizing.
Press
Mode , then release the button when Totalize is displayed. The primary display shows the
current weight. The secondary display alternates between TOTALIZE and the current totalized
weight.
Adding Weight to the Total Automatic Mode
Place the item on the weighing pan. The weight of the item is
shown on the primary display. The weight of the item is
added automatically to the total weight and the new total is
shown on the secondary display. Remove the item from the
weighing pan, then add the next item.
Manual Mode
Place the item on the weighing pan. The weight of the item is
shown on the primary display. Press the
Function button to
add the weight of the item to the total. The new total is shown
on the secondary display. Remove the item from the weighing
pan, then add the next item.
Clearing the Totalized Weight
Press and hold the
Mode button until TOTALIZE is shown on
the secondary display.
3.6 Additional Features
3.6.1 Weigh Below
The Adventurer Pro balance is equipped with a weigh below
hook.
Note : Before turning the balance over, install the cone cover
to prevent damage to the loadcell.
To use this feature, remove power from the balance and remove
the protective cover for the weigh below opening.
The balance can be supported using lab jacks or any other
convenient method. Make sure the balance is level and secure.
Use a string or wire to attach items to be weighed.
6 page 21 to 30.pmd 3/3/2005, 9:33 AM 23