Adventurer SL
EN-7
2.2.2 Assembly of Models AS64, AS214, AS313 (Cont.)
6. Install the top door panel.
• Insert the top door in the Draft Shield by holding the door vertically over the
top of the Draft Shield framework, as shown.
• Position the back edge of the door so that it lines up with two small hinges
located on the rear cross-member.
• Gently press the door onto the hinges until it snaps into place.
• Tilt the door forward to close.
Recessed hinge on
cross-member
Top door in vertical
position over Draft
Shield framework
Close-up view of recessed
hinge on Draft Shield
cross-member
Models AS64, AS214, AS313
