Valor
TM
4000 Series EN-3
3.2 Display
Item
Description
Item
Description
1
NET symbol
9
Calibration / Menu Mode symbol
2
Center of Zero symbol
10
Dynamic symbol*
3
Negative symbol
11
Battery charge symbol
4
Stable weight symbol
12
Pound, Ounce, Pound:Ounce symbol
5
Preset Tare symbol*
13
Gram, Kilogram symbols
6
Pointer symbols
14
Pieces symbol*
7
IR Sensor symbol
15
Percent symbol
8
Accumulation symbol
Note:
* Not Used
Rear display.
The colored LED indicators on the right side of the control panels are used in Checkweigh mode (section 3.6) and will light up
according to the following rules:
(Red) Loads > Upper limit
(Green) Loads ≥ Lower limit and ≤ Upper limit
(Yellow) Loads < Lower limit
3.3 Using the Instrument
Weiging application:
1.Press and hold Mode until [wJeIGH] (Weigh) is displayed.
2.If required, place an empty container on the pan and press Tare.
3.Add sample to the pan or container. The display shows the weight of the sample.
4. MAINTENANCE
.
4.1 Cleaning
WARNING:
Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention:
Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
1
1
IR Sensor
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
1
10
1
11
1
12
1
13
1
14
1
15
LED Indicators
