Ogura Industrial Corp, Somerset, NJ, USA www.ogura-clutch.com
The surface may become hot just by energizing. Do not touch the product while the power is
on.
The surface temperature of the main body rises due to the heat generated by the coil
even when the power is turned on. Please note that touching it may cause burns. The
temperature does not drop immediately after use. Make sure that the temperature has
dropped sufficiently before working, not only during operation, but also when touching
the product for maintenance or inspection.
1-5. Precautions While Operating
Do not increase the rotation beyond the permissible rotation speed.
If it is used above the permissible rotation speed, vibration will increase, and in some
cases it may be damaged or scattered, resulting in a very dangerous condition. Be sure
to use it at the allowable rotation speed or less and install a protective cover.
Do not touch the product while operating.
The rotating part is exposed to the outside, and touching the product with your hands or
fingers may cause injury. Never touch the product while operating.
The surface temperature of the product may rise to about 90 to 100 ° C due to slip heat
and heat generated by the built-in coil. Never touch the product while operating, as you
will get burned if you touch it. The temperature does not drop immediately after the
operation is stopped. Make sure that the temperature has dropped sufficiently before
working, not only during operation, but also when touching the product for
maintenance or inspection.
