Step 13:
Insert (2) Bolts into each (F - 2 3) beam. Attach (F - 2
3) to (F - 1 7) using the upper Bolt. Tighten the Nut to
the Bolt.
Note: Leave a three-quarter inch distance from the
edge of (F - 1 7) to the top of (F - 2 3). Tighten Nuts
at the indicated areas. The lower Bolt will be used in a
later step.
Step 14:
Position (F - 0 3 B), (F - 0 4), and the assembled parts
to a right angle. Make sure the grooves of (F - 0 4) and
(F - 0 3 B) are on the outside.
Step 15:
Insert (2) Bolts into (F - 0 3 B) and (F - 0 4). Attach (1)
Nut to each Bolt. Do not fully tighten the Nuts.
Summary of Contents for OGAL-866
Page 1: ......