24
Programming a playlist
•
When the mini-stereo is stopped, press the button
PROGRAM
, then select the desired track number
using the buttons
and
. Then press
PROGRAM
again and select another track number.
•
Repeat as often as necessary (99 tracks maximum). Then press
to start playback. Playback is in
the order you have defined.
listening to FM radio
1.
Connect the antenna cable supplied to the back of the mini-stereo, and extend it fully.
2.
Turn on the mini-stereo, and select the
FM TUNER
source by pressing the button
on the mini-
stereo several times or the button
SOURCE
on the remote control.
Performing a full scan on the FM band
1.
When the appliance is turned on, briefly press the button
AUTO
on the remote control or the
button of the mini-stereo to perform a full scan on the FM band. The first thirty stations found are
stored.
Search for a radio station automatically
1.
Press and hold the button
TUN -
or
TUN +
to perform a scan.
2.
FM scanning stops when a radio station has been found.
3.
You can then briefly press the button
TUN -
or
TUN +
on the remote control to refine your search, as
indicated in the paragraph below.
Searching for a radio station manually
1.
Briefly press the buttons
TUN -
or
TUN +
on the remote control until the optimal reception frequency
is reached.
2.
Each time the buttons
TUN -
or
TUN +
are pressed, the frequency increases / decreases by 0.05 MHz.
3.
If reception is poor, adjust the FM antenna position or change the frequency.
Summary of Contents for MS-O-700-D
Page 82: ......
