22
basic use
Switching the appliance on or off
1.
To turn on the mini-stereo, plug one end of the power cord into the back of the mini-stereo and then
plug the other end into a wall outlet.
2.
Press the button
on the remote control or on the appliance. The mini-stereo lights up on the
last active source.
3.
To turn off the mini-stereo, press the button
on the remote control or on the appliance again.
NOTE:
your appliance has an auto sleep function. If no audio signal is detected within 15 minutes
(excluding FM radio), it will automatically switch into standby mode.
Selecting an audio source
Select your playback source by pressing the button
on the mini-stereo or the button
SOURCE
of
the remote control:
CD, LINE IN, BLUETOOTH, USB and FM TUNER
.
Adjusting the volume
•
To increase or decrease the volume, turn the volume dial on the front of the mini-stereo or press the
buttons
VOL +
and
VOL -
on the remote control.
•
To mute the volume, press the button on the remote control. To reactivate the sound, press the
button
again, press the buttons
VOL +
and
VOL -
on the remote control or turn the knob on the
front of the appliance.
Modifying the sound effects
Repeatedly press the button
EQ
on the remote control to select the desired sound effect: ROCK, POP,
FLAT, JAZZ or CLASSIC.
Setting the time
•
In standby mode, press and hold the button
CLOCK
on the remote control to enter settings mode,
then use the buttons
and
to select a 12hr or 24hr format.
•
Press the button
CLOCK
again to confirm.
•
Then press the buttons
and
to set the time.
•
Press the button
CLOCK
again to confirm.
In playback mode, press the button
CLOCK
to display the time for 5 seconds.
Summary of Contents for MS-O-700-D
Page 82: ......
