manualshive.com logo in svg

OGHom HL6, User Manual, Page: 7 / 8

Share
Download
OGHom HL6 User Manual Download Page 7

future use.   

⚫

  Store all accessories with the unit in a dry, cool location.   

 

 

 

 

 

 

REMOVING MINERAL BUILD-UP                                                   

⚫

  Different water sources contain minerals and the sediment may cause mineral build-up in 

the steamer and affect the free flow of steam.   

⚫

  NOTE: The best way to avoid mineral build-up is to use distilled or de-mineralised water. 

If  you  are  unable  to  do  this  it  is  recommended  to  use  the  mineral  build-up  removal 

procedure. 

⚫

  Unplug  the  unit  and  allow  to  cool  completely  (at  least  60  minutes).  Remove  all 

accessories from the unit.   

⚫

  Remove the water tank cap and drain any remaining water from the water tank.   

⚫

  Slowly pour the mixture into the water tank.   

⚫

  Allow the unit to stand for 1-2 hours.   

⚫

  Drain the solution from the water tank.   

⚫

  If the mineral build-up still remains in the unit, repeat the above steps until all build-up is 

removed.   

⚫

  Rinse  the  water  tank  with  fresh  water,  drain  and  repeat  until  the  vinegar  odour  is 

eradicated.   

⚫

  Replace the water tank cap.   

 

SPECIFICATION                                                                                                       

⚫

  Unit Weight (Bare): 0.568kg. 

⚫

 

Water Tank Capacity: 240

ml.   

⚫

  Steam Output Time: 130 seconds.   

⚫

 

Steam Duration: 14-18

 minutes. 

⚫

  Voltage: 110-120V, 50/60Hz. 

⚫

  Wattage: 700W 

 

TROUBLESHOOTING                                                                                 

Problem 

Possible Reasons 

Solution   

Unit fails to heat.    Unit is not plugged in.   

Plug into mains power supply. 

Switch is not activated.   

Press the On/Off switch.                                             

Unit heats up but 

fails to steam.   

Water tank is empty.   

Refill the water tank according. 

Mineral build-up in unit.   

Follow  the  removing  mineral 

build-up guide.   

Thermo-fuse breakdown.   

Take to a certified service centre.   

Summary of Contents for HL6









Reviews:

No comments