OGHom HL6 User Manual Download Page 3

3. Finally pour clean water and boil for another 2-3 minutes. All unwanted 

dirt or precipitant will be removed and extend life. 

 

 

Please read these instructions for use and have a good look at the illustration 
before using the appliance 
 

 

Safety Instructions                                                                                 

 

When using electrical appliances, basic safety precautions should always be followed.   

 

  Do not place the product too close to any heat emitting appliances or in direct sunlight. 

  Check  that  the  voltage  indicated  on  the  data  plate  corresponds  with  that  of  the  local 

network before connecting the appliance to the mains power supply.   

  Do not leave the appliance unattended whilst connected to the mains power supply.   

  Do not immerse the appliance in water or any other liquids. 

  It  is  imperative  to  unplug  the  appliance  from  the  mains  power  supply  after  it  has  been 

used, before it is cleaned and whilst being repaired.   

  Close supervision is required when using this product near children.   

  Never leave the appliance within reach of children.   

  Repairs  to  electrical  appliances  should  only  be  performed  by  a  qualified  electrician. 

Improper repairs may place the user at serious risk.   

  This appliance is intended for household use only and should not be used for industrial 

purposes.   

  Do not operate this appliance with a damaged plug or cord, after a malfunction, or after 

being dropped damaged in any way.   

  Do not use this appliance for anything other than is intended use.   

  Steam produced by this unit is hot and pressurised. Care must be taken to avoid burns or 

other injuries.   

  Do not shake the appliance whist in use to avoid hot water splashing out.   

  Always  ensure  the  unit  has  cooled  thoroughly  before  re-filling  with  water,  cleaning  or 

storing.   

  Always disconnect the appliance from the mains power supply when filling or emptying of 

water. Ensure the water tank is emptied after each use before storing 

  Do not add chemicals or detergents to the water tank as they will damage the unit 

  The nozzle and accessories become hot during use. Do not touch the nozzle or attempt 

to change the accessories whilst the appliance is in use.                             

  Always  hold  the  unit  upright  and  do  not  fill  past  the  Max  mark  to  avoid  burns  from 

splashing water.   

  Use  the  unit  with  extreme  caution  with  a  tilted  angle  not  more  than  35°in  any  direct  to 

Summary of Contents for HL6









Reviews: