User’s Manual
Wireless USB Adapte
r
Page 3
The system will detect a new hardware has been added, and start the
“Found New
Hardware Wizard
”. Click on “
Cancel
”.
1) Please insert the disc into your CD-ROM drive. The disc should auto start, displaying the
following window, If it does not start, open the browser window, find the autorun.exe file in
your CD-ROM folder, click to run it.
2) Ralink has integrated all the 54Mbps 802.11b/g ,150Mbps or 300Mbps 802.11n driver into
one file. Click to run the “
Driver Installation
”
Notes: Because Ralink often updates software, the drivers contained in the disc
might be changed without prior notice.
3) Follow the instructions and prompts of the “InstallShield Wizard” to finish the driver
installation:
a. Select the “I accept the terms of the license agreements”, then click the “Next”.
b. There shows a setup type window, you can select “Install driver only” or “Install driver
and Ralink WLAN utility” and then click the “Next”.
Tips:
i. The Windows XP utilizes a "Wireless Zero Configuration( WZC)" Service built into
the operating system. Many wireless network adapter cards utilize this service.
