Product Operation Guide
Product Operation Guide
9
8
ii. [Demo]
Press the [Demo] button. If the rollers are not at the bottom position,
indicator light of [Power] button will flash and the rollers will return to the
bottom position. Then the heat function will be turned on. ( [Heat]
indicator light will blink.) A demostration of full back massage will be
started. ([Full Back] indicator light will blink.) The rollers move upward
from the bottom position and move downward after they reached the
top position. After the rollers return to the bottom bosition again, the
demostration is completed, the unit automatically turns off and all
indicator lights on the control panel turn off. In [Demo] state, you can
press the [Upper], [Full] or [Lower] button to stop the demostration and
start the corresponding function you selected.
v. [Spot Up] / [Spot Down]
[Spot Up] / [Spot Down] function would work only when the massage
mechanism is rolling. The kneading position can be adjusted by
pressing the [Spot Up] / [Spot Down] button.
The rollers would keep kneading and move upward when you press
and hold the [Spot Up] button. Until you release the [Spot Up] button,
the mechanism will start a vertical reciprocating massage between
current position and approx. 6cm higher position.
The rollers would keep kneading and move downward when you press
and hold the [Spot Down] button. Until you release the [Spot Down]
button, the mechanism will start a vertical reciprocating massage
between current position and approx. 6cm lower position.
vi. [Partial Up] / [Partial Down]
[Partial Up] / [Partial Down] function would work only when the massage
mechanism is rolling. The kneading position can be adjusted by press-
ing the [Partial Up] / [Partial Down] button.
The rollers would keep kneading and move upward when you press
and hold the [Partial Up] button. Until you release the [Partial Up]
button, the mechanism will start a vertical reciprocating massage
between current position and approx. 12cm higher position.
The rollers would keep kneading and move downward when you press
and hold the [Partial Down] button. Until you release the [Partial Down]
button, the mechanism will start a vertical reciprocating massage
between current position and approx. 12cm lower position.
iii. [Upper] / [Full] / [Lower]
Function available when [Power] is turned on.
Press the [Full] button, and the rollers will move up and down on the full
back.
Press the [Upper] button, and the rollers will move up and down on the
upper back.
Press the [Lower] button, and the rollers will move up and down on the
lower back.
iv. [Heat]
[Heat] function is available only when the massage mechanism is
functioning. Press the ON button, the heat function starts, L.E.D. lights
on the massage mechanism will illuminate. Press the OFF button, the
heat function stops, L.E.D. lights on the massange mechanism turn off.
