Ogawa COSMO-X, User Manual

Page: 11 / 40

17 18
Can one get sick often use the product?
零重力
Cleaning and maintenance Questions and answers(Q&A)
Cleaning of the synthetic leather
Cleaning of the plastic parts
Wipe the synthetic leather with a soft dry cloth.
Put a piece of soft cloth into water or
neutral detergent contained hot water,
wring it out and wipe the plastic parts.
Do not clean the product with chemicals
such as thinners, gasoline and alcohol.
Wipe with a piece of cloth once soaked
in clean water and wrung out.
Have the plastic parts take natural air
drying.
Wring the cloth out before using it to wipe
the remote controller.
Do not clean the product with chemicals such as thinners, gasoline
and alcohol.
When using a leather maintenance product(cleaning cloth) sold
on the market, follow its directions for use.
If the synthetic leather is very dirty, wipe it with the method below.
①
Put a piece of soft cloth into water or 3% to 5% neutral detergent
contained hot water and wring it out.
②
Wipe surface of the synthetic leather with the soft cloth
③
Wipe the detergent with a piece of cloth once soaked in clean
water and wrung out.
④
Wipe with a piece of wrung soft cloth.
⑤
Have the synthetic leather take natural air drying.
If it is difficult to remove the stains on the synthetic leather, soak a
piece of melamine foam bought from the market into a neutral
detergent and use it wipe the product.
Do not dry the surface by a hair drier.
Surface of the synthetic leather may be dried by fabric colors; therefore,
be careful when wiping the product with denim or colored cloth.
Keep these positions from long-time contact with plastics to avoid fading.
Synthetic leather may discolor, so the position in contact with the
hair dye used should be covered by a towel.
These persons should consult physicians
before using the product.
It is on back of the main body.
Massage is the so-called “touch-pressure stimulation”:
Muscles are compressed to relieve their tension and
promote hemokinesis. Some diseases may get
worsened because of massage.Thus, consult the
attending doctors before using the product.
To simulate the most natural massage effect, the product
is designed with a core structure allowing alternate back
massage by a left massage wheel and a right massage
wheel. During massage, the massage wheels possibly
have slightly different position on the back. That’s why
you have that feeling. It is not a fault.
Select method or below:
Select method or below:
Tilt the backrest and lower the Lower Leg/Foot massage
section
Massage the upper body only with the help of the footrest.
(Massage the feet and the upper boday separately.)
Raise the backrest and lift the Lower/Foot massage section.
Massage the upper body only with the help of the footrest.
(Massage the feet and the upper body separately.)
The body height requirement differs with the
specific body type. See the rough reference
below when using the product.
Pay attention to the following things during
moving.
For a taller person with knee bending when using the product:
For a short person difficult to touch the foot massage section:
If a person shorter than 145 centimeters or taller than
185 centimeters uses the upper body massage
function and the Lower Leg/Foot massage function of
the product at the same time, it will be possible that
his soleswill have poor contact with the foot massage
section or that his knees will need to be bent.
If the original packing box is available, make sure the
power line is not wound on the product, wind it and place
it on the seat surface. When handling the product, keep
the power line from falling off and rubbing with ground.
If the original packing box is unavailable, properly keep
other packing auxiliary materials and wrap the product
with them to avoid scratch and vibration during handling.
For convenience during moving, tilt backrest of the
product till the lowest position.
During handling, do not sit on the product.
Press ON button power on the product.
Press to make the
backrest completely tilt.
Press the button until
backrest and footrest stop
Turn off the power switch and pull out the power plug.
How about the body height requirement for
use of the product?
Where is serial number of the product?
It is caused by the core structure.
Mind the sounds of the product makes
when operating
.
This phenomenon possibly exits during
massage because of the core structure.
Does it matter if the massage wheels have
different massage intensities?
Set the air bag intensity to be “1” through the
Air Bag button. You can also lower the Lower
leg/Foot massage section to reduce the
acupressure force on the feet.
The acupressure force is too large.
Supposing you massage for 30 minutes in two
times (15 minutes for each time) on each day,
about 2.5 kilowatt-hours will be consumed
each month.
How about monthly power consumption of
the product?
Are there any things needing special attention
during moving
？
。