12
Step 3: Seat Post, Seat Cushion Installation
Remove three Ø8
×
Ø16
×
1.5 Flat Washers (17) and three M8 Nylon Nuts (18) from under the
Seat Cushion (16). Attach the Seat Post (15) to the Seat Cushion (16) using three Ø8
×
Ø16
×
1.5 Flat Washers (17) and three M8 Nylon Nuts (18). Tighten with the Spanner with Phillips
Screwdriver provided.
Insert the Seat Post (15) into the Seat Post Plastic Bushing on the tube of the Main Frame (1)
and then attach the M16 Seat Height Adjustable Knob (63) onto the tube of the Main Frame (1)
by turning it in a clockwise direction to lock the Seat Post (15) in the suitable position.
Adjusting the Seat Height
Turn the M12 Seat Height Adjustable Knob (63) in a counterclockwise direction to release the
Seat Post (15) and then slide the Seat Post (15) up or down slightly to the desired hole for the
suitable position.Lock the Seat Post (15) in place by tightening the M12 Seat Height Adjustable
Knob (63) in a clockwise direction.
NOTE: When adjusting the height of seat post, make sure the seat post plastic
bushing does not exceed the mark line on the seat post.
Tool:
Spanner
with
Phillips
Screwdriver S13-S14-S15
63
01
75
17
18
15
16
Summary of Contents for AC 3211
Page 1: ...1 USER MANUAL ...