7
ofs.com
imagine a place®
800.521.5381
Assembly instructions
Tilly assembly instructions
Tools required:
2-⅛
“ Diameter hole saw
Phillips head screwdriver
1.
Drill a 2-⅛
” hole in the work surface.
2.
Install surface mount base in hole, ensuring anti-rotation stop is located appropriately for the
intended orientation.
3.
The surface mount base will be pre-attached to the light fi xture, so the limits of the base
rotation can be determined by rotating the base by hand (
Figure A
)
4.
Feed the fi xture’s power cord through the holes in surface mount and work surface.
5.
Fasten the surface mount bracket using a Phillips head screwdriver by loosely installing the 3
screws provided through the lower washer in the bottom of the surface mount bracket.
6.
Before fully tightening the lower screws, ensure that the light rotates over the desired area.
7.
Connect silver quick-connect cord to power supply. (
Figure B
)
Surface mount
Figure A
Mount bracket
Mount base
Power cord
Figure B
Assembly:
