6
ofs.com
imagine a place®
800.521.5381
Assembly instructions
Tilly assembly instructions
Assembly:
1.
Turn the adjustment screw out to allow for a space larger than the thickness of the work
surface.
2.
Position the clamp bracket onto the work surface in the desired location and tighten the
adjustment screw. Make sure there is a gap between the back edge of the surface and the
wall or panel of approximately ½” to allow for the power plug connector to pass through.
(
Figure A
)
3.
Connect silver quick-connect cord to power supply. (
Figure B
)
Clamp mount
Figure A
Adjustment screw
Quick-connect cord
Figure B
