Launch by OFS | 3
LAUNCH
Note: Illustrations display model LA-24358CT.
Any variations in assembly for smaller models will be noted in the text.
INSTALLATION TIPS
1. Table will be too heavy to move after assembly. Be sure table base and beam
assembly is in desired location and is level.
See page 4, Step 2.
2. Table section with end opening labeled “A” must be over power source when
powered through end of table.
See page 5, Step 4.
3. First Box must always be installed at end of table. Match Box labeled “A” to opening
labeled “A”.
See page 12, Step 1.
4. When placing Power/Data boxes into table male end of T-connector must point
towards First Box.
See page 12, Step 1.
5. Power/Data boxes must be secured with brackets or warranty will be voided.
See
page 12, Step 2.
6. Center powered tables requires additonal splitter.
See page 14.
