Ofna Racing CD-3 PRO RTR, Assembly Instructions Manual

Page: 2 / 38

Diff Oil -
Silicone
REQUIRED FOR OPERATION
THINGS NEEDED
AA Batteries ( 12 pcs )
Glow Fuel
20%
TOOLS NOT INCLUDED IN KIT,
BUT NEEDED TO MAINTAIN YOUR CAR.
Phillips Type Screw Drivers ( L )
Phillips Type Screw Drivers ( S )
Needle Nose Pliers
Cutter
Curved Scissors
Knife
Instant Cement
Cross Wrench
#17109 $3.95
Glow Plug & 17MM Cross Wrench
#10801 $6.95
You need to get batteries for the radio transmitter and the car receiver
packs.
• Radio TX needs (8) eight AA batteries.
• Car needs (4) four AA Ni-cad batteries, Alkaline type batteries will
work, but braking will be reduced. The best is to use a 5 cell hump
pack for increased voltage..
Recommended Option:
You may want to upgrade the car battery pack to a Ni-Cad or NiHm 5
cell type(600AE). This will give more run time. OFNA #10212
#10212 NiHm Hump Pack,
see charger 10214.
10214
Over-nite
Charger
You will need to buy a few items to start the engine and run the car.
• Use 20% nitro CAR fuel. Do not use airplane or helli fuels, they will
over heat engine.
• Buy SHORT glow plugs, OFNA/PICCO Plu (#51007 or 51008) are
long therefore use two copper washers. Use plugs without idle bar.
Always use two copper washers with Picco glow plugs.
In your box you will find..
• #10163 - 250cc Fuel Bottle
• #10219 - Red “D” size glow heater
These parts change depending on stock!