OFFICINE OROBICHE S.p.A.
8/9
24010 Ponteranica (Bergamo) ITALY - via Serena, 10 - Phone 0039/035/4530211 - Fax 0039/035/570546 - www.officineorobiche.it-e-mail:[email protected]
******************************************************************************************************************************************************************
MAR.’13
Information subject to change without notice
IST/164-I
Always mention the instrument serial number in
your request for spare parts.
This number is provided on the instrument rating
plate that is fastened to the bottom of the unit and
is a five-digit number preceded by the letter
”F”(e.g..:F45678).
10. TROUBLESHOOTING
Level indicators of the TLQ series are not normally exposed to faults.
In cases when the measurement is not taken, carry out the test as described
in paragraph 7 MAINTENANCE
11. DISPOSAL
When the instruments have come to the end of their service life, they need to undergo disposal. Always comply with the
applicable regulations in force.
During the disposal stages, specially mind the polymers, resins and rubbers used in the manufacture (such as PVC,
PTFE, PP, PVDF, neoprene, Viton, etc.).
Separate the mechanical part from the electronics, which need to undergo disposal in compliance with thaw regulations
in force.
All metal parts, after removal of seals and gaskets, special protective coatings requested by the customer and all other
plastic parts, can be recycled.
12. GUARANTEE
All level indicators are guaranteed to be free from manufacturing faults over a period of 12 months from the date of shipment.
In the event of failures, implying return of goods within the limit specified above, OFFICINE OROBICHE will replace
(shipment fees not included) all damaged parts free, provided that the failure does not ensue from incorrect use.
OFFICINE OROBICHE shall never be held responsible for any incorrect use of their products when these are used for
purposes other than those mentioned in the specifications approved at the order stage.
In these cases, no complaints will ever be taken into consideration.
No damage and/or fee, whether direct or indirect, ensuing from an incorrect installation or use shall ever be debited to
OFFICINE OROBICHE.
The instrument can be used for a maximum life period of 10 years dating from delivery.
When this period is over, there are two alternative options:
1) Replace it with a new instrument.
2) Have the old instrument overhauled by OFFICINE OROBICHE
INSTRUMENT RETURN PROCEDURE
The instrument returning to the factory shall bear, in attachment, the following data: