Officine Gullo PVS4, Instructions For Installation And Use Manual

Page: 8 / 16

8
Officine Gullo
DECLARATION OF COMPLIANCE
The manufacturer declares that the appliances are compliant with the prescriptions of the
EEC norm 90/396. The installation must be done observing the norms in force particularly
concerning room ventilation and discharging gas emissions.
N.B.: The manufacturer declines any responsibility for direct or indirect damage caused
by improper or incorrect installation, alterations, maintenance or use of the appliance, as
in all the other cases considered in the items of our sales conditions.
INSTRUCTIONS FOR INSTALLATION
When fitting, the appliance must be levelled using a spirit level; slight differences of level
can be adjusted by screwing or unscrewing the adjustable feet. The main switch or the so-
cket must be near the appliance and easily accessibile.
It is advisable to place the appliance under an extractor hood so that steam is extracted
rapidly. If the appliance is placed near walls, dividing panels, kitchen furniture, decorative
finishings, etc., these should be in flameproof material; otherwise it is necessary to cover
them with non-flammable material.
Above all, it is necessary to ensure that the fire prevention norms are observed
LAWS, TECHNICAL RULES AND NORMS
Installation must be carried out observing the following norms:
- Safety prescription in force
- Installation prescription, ECI norms.
The installation, starting up and maintenance of the appliance must be carried out by
qualified personnel. All operations done when installing must be carried out observing the
norms in force.
The manufacturer declines all responsibility in the event of incorrect functioning due to
TECHNICAL ELECTRICAL DATA TABL
E
TRANSFORMATION
MODELS
DIMENSIONS
cm
POWER SUPPLY Power max
kW
Absorbition
max A
Power supply
cable
PVS4
40 x 70 x 29h 400V 2N 50/60Hz 5 10,9 4 x 1.5 mm²
PVS8
40 x 70 x 29h 400V 3N 50/60 Hz 10 21,7 5 x 2.5 mm²
MODELS POWER SUPPLY Power max
kW
Absorbition
max A
Power supply
cable
PVS4 230Vac 50/60Hz
5 kW 21,74 A 3 x 2,5
mm²
PVS8 230Vac3 50/60Hz
10 kW 28,76 A 4 x 4
mm²