Officine Gullo OGG 304FCU, Instructions For Installation And Use Manual

Page: 48 / 52

EN
46
32 - Solving Operational Problems
Oven Problem Problem Solving Steps
Surface burner flames are uneven yellow and/or noisy
Are the burner ports clogged? See “Super Sealed Surface Burners” section.
Are the burner caps positioned
properly? See “Super Sealed Surface Burners” section.
Is propane gas being used? The appliance may have been converted improperly. Contact a service technician.
Surface burner makes popping noises
Is the burner wet? Let it dry.
Is the cap and gas spreader
positioned correctly? Make sure the alignment pins are properly aligned see “Super Sealed Surface Burners”
section.
Excessive heat around cookware on cooktop
Is the cookware the proper size? Use cookware about the same size as the surface cooking area, element or surface burner.
Cookware should not extend more than 1 in (2.5 cm) outside the cooking area.
Cooktop cooking results not what expected
Is the proper cookware being
used? See “Cookware” section.
Is the control knob set to the proper
heat level? See “Setting the Control Knobs” section.