10
Officine Gullo
EMPTYING THE TUB MOD. CVC...
To carry out this operation, it is necessary to open the outlet tap (lever in vertical position)
which can only be reached through the cabinet door situated below the appliance.
ANOMALIES
If the probe does not detect the presence of water in the tank for more than 15 sec. the
system disables the heating element: the alarm is indicated by a flashing red light
When the probe returns to detect the presence of water, the heating element is activated
and the red light is turned off.
NOTE: the filling phase is monitored by the system through the TIME-OUT.
TIME- OUT
After discovering the level probe, the micro controller triggers an internal timer relative
to the duration of this phase. If (continuous) loading takes longer than 350 seconds, the
system blocks the functions of the device and the alarm is signalled by the steady red
light.
To reset the alarm condition, after removing the fault that caused the intervention (broken
or disconnected level probes, problems with the water supply, drain valve open...), the
system must be turned OFF/ON.
CARE AND CLEANING INSTRUCTIONS
CLEANING AND MAINTENANCE
Attention! During cleaning, do not wash the external parts of the appliance with direct
sprays of water or with high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the ap-
pliance ensures the perfect functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must
be washed with hot water and neutral detergent, then rinsed thoroughly in order to eliminate
all traces of detergent; after which, dried with a dry cloth. Do not use abrasive or corrosive
detergents.
All residues of food must be removed from the hotplate with the proper spatula. The surface
must be cleaned well and then greased with a film of vegetable oil. Remove the drip pan,
empty it and wash it carefully.
Summary of Contents for CVCS4EM
Page 2: ......
