Officine Gullo 20GG 304FU, Instructions For Installation Manual

Page: 30 / 48

EN
8
STEP 5
Slide back more and tilt back (9), putting the rear legs on the
floor and then mount the front legs while in this angled position
supported by the rear legs and the skid.
9
STEP 6/7
Remove the base while supporting the front of the range (10)
and lower to the floor in a controlled manner.
10
STEP 8
After completing the electrical and gas connections (see
included instructions) measure the four corners in cutout area
to verify if flooring is level. Adjust the leveling legs to the desired
height and ensure range is level. Turn the bottom section of
each leg counter-clockwise to raise the leg and clockwise to
lower it.
IMPORTANT
When the unit first powers on, it must complete a safety door
lock test. Ensure doors are reinstalled if they were removed
to ease movement of the range prior to sending power to
the appliance. Do not open the oven door or attempt to
use the oven until you are sure the test has been completed
successfully. Opening / closing the door during the test
could result in damage to the lock mechanism. Refer to the
instruction manuals for more details if needed.
STEP 9
Ensure floor is protected. Slide unit into place making sure to
engage the anti-tip bracket.
4 - Installation Instructions