IMPORTANT NOTE:
1. Use hand tools only for assembly as power tools may cause damage
2. Carefully remove any staples used for packaging.
PART
QTY
1.
Glass Top . . . . . . . . . . . . . . . . . . . 1
2.
Keyboard Tray . . . . . . . . . . . . . . . . 1
3.
Organizer Box . . . . . . . . . . . . . . . . 1
4.
Leg Frame (4L & 4R) . . . . . . . . . . . 2
5.
Top Rail . . . . . . . . . . . . . . . . . . . . . 2
6.
Bottom Rail . . . . . . . . . . . . . . . . . . 1
7.
Cross Rod . . . . . . . . . . . . . . . . . . . 1
8.
Wood Dowel . . . . . . . . . . . . . . . . 12
9.
Bolt . . . . . . . . . . . . . . . . . . . . . . . . 4
10.
Rubber Glass Support . . . . . . . . . 4
TRI2542G
COMPUTER DESK
ASSEMBLY INSTRUCTIONS
TRI2542G
COMPUTER DESK
ASSEMBLY INSTRUCTIONS
© Office Star Products March 2011
1
2
3
2
7
5
5
6
4L
4R
8
9
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert two Wooden Dowels (8) into each end of both Top Rails (5) and Bottom Rail (6). Attach both Top Rails (5) and Bottom Rail (6) to both
Leg Frame (4L & 4R) and secure by setting locks into position.
STEP 2
Attach Cross Rod (7) to rear of assembly using four Bolts (9).
FULLY TIGHTEN ALL BOLTS (9).
STEP 3
Insert four Rubber Glass Supports (10) into top of desk assembly. Carefully slide Keyboard Tray (2) into built-in glides of assembly.
STEP 4
Attach Organizer Box (3) to Keyboard Tray (2).
STEP 5
Carefully place Glass Top (1) onto desk assembly.
ATTENTION: MAKE SURE ALL BOLTS (9) ARE FULLY TIGHTENED AND ‘LOCKS’ ARE IN THE LOCKED
POSITION BEFORE USING DESK.
10
